The professional equipment selected can not only produce qualified products for the enterprise and earn profits, but also ensure the safety of the staff and expand the reputation of the enterprise. Therefore, it is necessary to professionally choose a hot air circulation oven. The application scope of the hot air circulation oven is very wide. It has high thermal efficiency and can dry various industrial materials. It features automatic temperature control and is a universal drying equipment. The oven operates smoothly and the materials are dried evenly. It is an ideal universal drying equipment. Therefore, it is necessary to choose a professional hot air circulation oven.
The hot air circulation oven adopts a fan circulation air supply method. Because no matter what structure the oven has, whether the air direction is horizontal or vertical, in the end, it is always hot air circulating inside, and the air circulation is uniform and efficient. The air source is driven by a circulating air supply motor to drive the fan wheel through the heater, ensuring the uniformity of the indoor temperature and then sending out the hot air. The hot air then enters the inner chamber of the oven through the air duct. When the temperature value fluctuates due to the opening and closing of the door, the air supply circulation system quickly recovers and sucks the used air into the air duct to become the air source for another cycle of heating and reuse. Therefore, it is necessary to professionally choose a hot air circulation oven.
The use and maintenance of a hot air circulation oven are also very important. When it is powered on and in operation, it is strictly forbidden to touch the electrical parts on the left side of the box with your hands, wipe it with a damp cloth or rinse it with water. Do not place items too densely inside the box. It is necessary to leave space for the natural convection of the atmosphere to allow the moist atmosphere to slow down and escape at the top of the air. The operation of this instrument must be carried out by a designated person. After the equipment is used, the external power supply should be cut off to prevent unexpected accidents. Do not disassemble or assemble electrical components and other parts of the equipment at will, so as to avoid protecting the electrical control circuit and causing human faults in the equipment, which may affect its function.